Abstract
Objective: To test the use of the MT surgical #articulator manufactured by Bio art, a company located in Sao Carlos, SP, Brazil, as
an efficient and reliable method for model surgery and to compare the
values obtained to those obtained with the #Erickson platform.
Material and Methods: Model surgeries were performed using the
Erickson platform and the MT surgical articulator and #surgical guides
were obtained with the following types of jaw movement: advancement of
5.0 mm, posterior intrusion of 5.0 mm, total intrusion of 5.0 mm, left
unilateral intrusion of 5.0 mm, left laterality of 5.0 mm, and left
rotation of 5.0 mm. The guides were measured using two Erickson
platforms, one of them modified with the adaptation of a tip to the
caliper. Lin's coefficient was used to #determine the degree of
concordance between the two pairs of measurements.
Results: The Lin coefficient obtained in the comparison of the
measurements of the guides constructed on the Erickson platform to
those obtained with the MT surgical articulator was 0.99721, with the
maximum degree of concordance being 1.
For more articles on BJSTR Journal please click on https://biomedres.us/
For more Scientific and Technical Research Articles on BJSTR
Comparison of the MT Surgical Articulator to the Erickson Platform Method for the Execution of Model Surgery by Arvind Kumar in BJSTR
Follow on Twitter : https://twitter.com/Biomedres01
Follow on Tumbler: https://biomedres.tumblr.com/
Like Our Pins On : https://www.pinterest.com/biomedres/
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.